BOATSAFE 250W ENGINE HEATER COMPARTMENT HEATER 150CU FEET
	Quantity in Basket: None Code: 25144 Price: $309.00
	Quantity:
SPECIFICATIONS - MODEL JR - 250W (For Engine Compartments of 150 cu. ft. or less) (Boats with single engine, up to 24', or most sailboats) NOTE: This heater WILL NOT provide adequate protection for a boat that is stored out of the water on a lift, or on a trailer. UNIT DIMENSIONS: 51/2"H x 41/2"W x 141/2" L - 1" Mounting Bracket at each end of unit. Weight - Approximately 4 lbs. UNIT ENCLOSURE: 16 Ga. aluminum. Designed for exceptional strength and long life. CAD Vents for proper air flow and maximum heat distribution. Fully Powder Coated for scratch and corrosion resistance. HEATING ELEMENT: 250W, Cast Alloy, completely sealed, specially designed and engineered for this application. Cast Alloy provides excellent corrosion resistance. Vibration resistant. Will not spark. UL recognized. THERMOSTAT CONTROL: Hermetically sealed. Factory calibrated and pre-set to activate heater unit when ambient air temperature falls below 45 F (approximately), and continue operation until ambient reaches 55 F (approximately). FM approved. FAN: Heavy Duty, computer style induction fan. Rated at 21 CFM. UL recognized. CSA certified. POWER CORD: 15' - Rated 13A, heavy duty service. Includes a molded 3 prong plug. UL and CSA recognized. UNIT DRAW: Approximately 2.2A at 120V. BTU OUTPUT: 860 BTU COST TO OPERATE: 2/Hr. (Based on Average Electricity Cost of 8/KWH) TEST OPERATION OF UNIT: To "test" the unit when ambient air temperature is above 45oF you must simulate an ambient below 45F. To create the simulation: With the heater unit plugged into a 120V power source, locate the 1/2" dia. hole marked "Test" on the end cover of the unit. Using the 6 oz. can of Freeze Mist spray supplied with your heater, insert the "straw" into the nozzle and spray a 2-3 second burst of mist into the "Test" hole. This will "trick" the thermostat into turning the heater "ON". After a period of time (30 sec. - 3 min.), the ambient temperature of your test environment will resume control of the thermostat and turn your heater "OFF".